[ICOM] SWR problem on 706Mk2G

[John Geiger]

Yes, those antennas are ok on other rigs.

73 John zAG5CC


On Saturday, December 19, 2015, Tony Hwang <dragon40 at shaw.ca> wrote:

> Hi,
> Do you have dummy load?
> Noise bridge?
> Sure your 6m and 15m band antenna is tuned alright or tested with
> other radio?
> 73,
> Tony, VE6CGX
>
> John Geiger wrote:
>
>> I recently purchased a used ICOM 706MK2G and it seems to have swr meter
>> issues on a couple of bands.  This occurs on 15 and 6 meters where the swr
>> is reading higher than what it should.  Has anyone seen this before, or
>> knows how to fix it?
>> I tried tightening the circuit board screws and that didn't fix it.
>>
>> 73
>> John AF5CC
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>