[ICOM] IC-756ProIII: Meter adjustment menu Was: increase tuning power to 20 Watts?

[Joe]

I was thinking of doing what a LOT of people have been doing for the QRP 
or Digital Modes, apply a variable DC voltage to the ALC input,and just 
run the radio at MAX power and switch in this "X" power level  at 
whatever level you want it to be,

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 12/4/2015 5:07 PM, Alex wrote:
> It looks as if it can be set through the meter adjustment menu. Per 
> the service manual, I put a 3.5mm plug in the remote jack and then I 
> hold the SSB and CW/RTTY buttons down while powering on the PIII, but 
> the adjustment menu does not appear. Has anyone ever successfully 
> accessed this menu? Perhaps I'm overlooking something.
>
> 73,
> --Alex KR1ST
>
>
> On 2015-12-04 15:33, Alex wrote:
>> Hi there,
>>
>> Does anyone know how to increase the power output of an IC-756ProIII,
>> while it is in tuning mode with an external tuner using the tuner
>> interface, from 8-10 Watts to 20 Watts?
>>
>> 783,
>> --Alex KR1ST
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>