[ICOM] 756 pro II problem

[Ken Sands]

Dan,
I am going to look at the schematic of the Pro 2 and try to find that
resistor,.....STAY TUNED!!

73
Ken

On Mon, Oct 13, 2014 at 10:09 AM, Dan Cotsirilos <k9dtc at comcast.net> wrote:

> Something very strange is going on with my PRO II. I was using a PRO for
> weeks without issues. I upgraded to a PRO II and sold the other. Sometime
> last Sunday with the radio just receiving the power supply Astron 35 got
> super hot. So hot it was melting the cord. I had the supply totally check
> out and nothing was wrong.
>
> In meantime I have been using a Astron 20M (for over a week) with the
> meter in the amp position and this morning after the radio was on for about
> 10 mins I went to transmit and saw the display blinking. I looked at the
> meter and it was drawing 20 amps just in receive mode. I shut off the radio
> and it was still drawing 20 amps. I turned off the supply disconnected the
> radio and the amps were zero. I reconnected the radio and it works perfect!
> Anyone have a clue what could be wrong?
>
> Dan K9DTC
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>