[ICOM] pro 3 repair?

[k0bx at arrl.net]

Whats up Chuck?

Had to say it, I setn my Pro-3 to Icom East the 1st time.  Did a FB Job,
2nd time (out of warranty) I sent it to Burkhart in SD.  They installed a Front-End mode on mine.
Mine had no output on any band but it was not the finals.

Joe K0BX


 
#1 Honor Roll Mixed
Honor Roll RTTY


Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission.


________________________________
 From: "KI9A at aol.com" <KI9A at aol.com>
To: icom at mailman.qth.net 
Sent: Friday, October 25, 2013 9:12 PM
Subject: [ICOM] pro 3 repair?
 

Gang, my pro3 just popped the PA, intermittent output varies from  around 
90w down to 20w on all bands ( yes, into a 50 ohm load).

Who is the guy to send it to these days? I sent a 746 off about 10 yrs  ago 
for some work, ant remember where though.

73- Chuck KI9A 
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html