[ICOM] ICOM IC-756PRO3... PW1 AMP/ TRANSVERTER

[r morris]

P.S...
Use good shielded wire. Do every pin in all ACC plugs, even the one you think you will never use. Make nice cables and never look back.

--- On Mon, 2/11/13, Chuck Sudds <chuck at dxham.net> wrote:

From: Chuck Sudds <chuck at dxham.net>
Subject: Re: [ICOM] ICOM IC-756PRO3... PW1 AMP/ TRANSVERTER
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Monday, February 11, 2013, 1:35 PM

On 2/11/2013 11:18 AM, RK wrote:

One of the BEST ideas I have read about in my 54 years as a ham!! Thanks 
for passing this along!!

Chuck - KØTVD
> On every radio setup I have had for years, I take all the connections on the back of the radio to terminal strips in a box, mounted on the back of the desk. I do every pin, no matter what, do the DIN plugs one time and never have to move the radio to change the "interface of the week". <SNIP>
> 7 3 de N6EQ
> Chuck
> ____________________________________________________________
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html