[ICOM] IC-746 band voltage output

[Bert Almemo]

Good morning Larry,

Thanks for your comments and suggestion. Much appreciated. I'll check out
the 746 yahoo group.

Have a great day!

Bert, VE3NR

 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Larry Young
Sent: Tuesday, June 19, 2012 12:08 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC-746 band voltage output

Bert, I suspect there is a way to restore the band data voltage, but I am
not that faliliar with the 746 series of radios. Perhaps someone in the 746
group, http://groups.yahoo.com/group/IC746/  can help.
Larry K4LXV

--- On Mon, 6/18/12, Bert Almemo <balmemo at sympatico.ca> wrote:

From: Bert Almemo <balmemo at sympatico.ca>
Subject: [ICOM] IC-746 band voltage output
To: icom at mailman.qth.net
Date: Monday, June 18, 2012, 11:54 PM

In a previous posting I mixed up the info about CI-V and band voltages from
the 746. Sorry about the confusion.

The problem I'm having is that the band voltages from the 746 are not within
the ranges according to the specs in the manual. Is there a way the voltages
can be adjusted or is there a problem with a level converter or other
circuit? Thanks.

73 Bert, VE3NR


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html