[ICOM] IC-746 band voltage output

[Larry Young]

Bert, I suspect there is a way to restore the band data voltage, but I am not that faliliar with the 746 series of radios. Perhaps someone in the 746 group, http://groups.yahoo.com/group/IC746/  can help.
Larry K4LXV

--- On Mon, 6/18/12, Bert Almemo <balmemo at sympatico.ca> wrote:

From: Bert Almemo <balmemo at sympatico.ca>
Subject: [ICOM] IC-746 band voltage output
To: icom at mailman.qth.net
Date: Monday, June 18, 2012, 11:54 PM

In a previous posting I mixed up the info about CI-V and band voltages from
the 746. Sorry about the confusion.

The problem I'm having is that the band voltages from the 746 are not within
the ranges according to the specs in the manual. Is there a way the voltages
can be adjusted or is there a problem with a level converter or other
circuit? Thanks.

73 Bert, VE3NR


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html