[ICOM] My Pro III Shutdown Problem

[hamop]

Joe.
There are NO FUSES in the PS125 short cable. The only fuses are INSIDE the 
unit and very hard to get to if one went completely out. hi  And for all 
three PS supplies to have same issue would be difficult to I imagine. hi hi 
So, I do not use any non-Icom supply and none of my PS have fused in the 
cable.
San    TU and Happy 4th

-----Original Message----- 
From: Joe Moraine
Sent: Tuesday, July 03, 2012 7:59 AM
To: icom at mailman.qth.net
Subject: [ICOM] My Pro III Shutdown Problem

San,
Been following your problem with interest.  I haven't seen anyone mention 
your power supply cable FUSES.  I know you have switched power supplies, but 
I wonder if you have switched power supply cables too?  A few guys have had 
problems with corrosion in the power supply cable FUSES causing intermittent 
problems like you have experienced.  Check the fuses in the power supply 
cable.  If this has already been mentioned, I apologize.  And Happy 4th of 
July to a great DXer.
Joe, W5LX
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html