[ICOM] IC 775 clicks

Dwayne 863 at telus.net
Mon Jan 23 17:52:17 EST 2012


Hi
   Name is Dwayne (ve6qx).. I think you have to set drive controll 
properly... Turn Drive fully clockwise.. Set pwr control for  what ever 
power out you want, then turn the drive down to that point on pwr out.. You 
can see the drive start to decrease the pwr out when you get to that level.. 
Drive and power go hand in hand...
   I was told this radio can't be used to drive amp. becuz of overshoot and 
that was true if I didn't have pwr and drive control set properly..  Hope 
this helps

    Pse. let me know how this works for you..

  Dwayne   Ve6qx





----- Original Message ----- 
From: "Maciej Wieczorek" <sp2xf at wp.pl>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, January 23, 2012 2:33 PM
Subject: [ICOM] IC 775 clicks


> GM/GE,
>
> Has anyone ever seen any mod for IC 775 DSP, for getting rid of CW clicks? 
> I
> mean, kind of solution that they have for FT 1000 mark V..?
>
> BTW, maybe I have a problem with my radio, with the signal S 9+30db on 
> 160m
> (no amplifier) a friend located 30kms away was hearing my clicks for 
> almost
> 1,5khz up/dwn, with 400hz filter....
>
> I'm preparing for CQWW 160m contest, so yesterday we made several tests 
> and
> after puting the same power from IC 765 the difference is huge, almost no
> clicks and nothing detected if we go  +/-  0,5 khz  from the TX 
> frequency...
>
> 73's
> Mac SP2XF
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 



More information about the Icom mailing list