[ICOM] How to adapt the PS-125 to use as a PS-126

[Ken Winterling]

John,

Look at the adapter in the following link:
http://www.universal-radio.com/catalog/hamps/2694.html

Ken
WA2LBI


On Fri, Dec 21, 2012 at 12:04 PM, Larry Young <k4lxv at bellsouth.net> wrote:

> John: There are 3 solutions to using a PS-125 on a radio with the newer
> style power connector. 1. Use an adapter that plugs into the PS-125 and
> then the other radio. This is the simplest and lowest cost way. 2. Remove
> the connector from the end of the PS-125, and replace it with the connector
> utilized by the PS-126. This is the next simplest solution, but shortens
> the DC power cord. 3. Replace the DC power cord and connector of the PS-125
> with the one of the PS-126. This is the most expensive and labor intensive
> solution.
> Larry K4LXV
>
> --- On Fri, 12/21/12, John Hensley <w5jv at hotmail.com> wrote:
>
> From: John Hensley <w5jv at hotmail.com>
> Subject: [ICOM] How to adapt the PS-125 to use as a PS-126
> To: icom at mailman.qth.net
> Date: Friday, December 21, 2012, 11:45 AM
>
>
> Does anyone have information on converting the power cord on an ICOM
> PS-125 so that it can be used as a PS-126?  Is the cord replaced or is the
> end connector replaced?  Are there any caveats in doing this?
> This is my first time on the list in a long time.  Sorry if this is a
> rehash for some of you.
> 73, John
>