[ICOM] UT-102 operation in IC-756Pro3 help

[Pat Byrne]

That's how my PRO III and the speech board work.  S-meter then 
freq.  Moved it from a 746 PRO where it worked the same way.
Pat, K9JAUAt 04:51 PM 4/6/2012, you wrote:
>Get it onto a nice signal. Hit the lock button for 2 seconds like you
>found to do,  the S-Mater reading is usually first goes something like
>this. 9, being the S meter reading, a very short pause then says
>14.230.00 MHz
>I'll play a bit with my IC-7000 this weekend and see how it work,but the
>UT-102 used to work this way a number of years ago.
>
>Gary K8IZ
>
>
>
>
>On 4/6/2012 1:41 PM, Stephen Budensiek wrote:
> > Hello all,
> >     Got a UT-102 in today, installed it in a IC-756ProIII.
> >
> > Setup is:
> >     SPEECH Language         English
> >     SPEECH Speed              High (also tried LOW)
> >     SPEECH S-Level             ON
> >
> >     I've found that hitting and holding the LOCK button for 2 seconds
> > generates the speech frequency reading.   Hitting a mode button to
> > change mode generates a speech mode reading.   Absolutely nothing I've
> > done generates the S-Meter speech reading.  Anyone have any ideal what
> > is going on?  The users manual is absolutely useless on this.  Cycling
> > the radio off and back on doesn't help any either.
> >     I had a IC-756ProII for a little while, it had several major
> > problems, so I returned it.   But, it responded very differently to
> > Speech request.   Anytime I hit a band key, it would speak the
> > frequency and mode.   Don't know if someone had done a special mod
> > somewhere to do this?   Maybe it was part of the cause of the radio
> > acting wierd part of the time?
> >     Any input would be appreciated on this.
> >
> > 73's de Stephen, K0SD
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
>
>
>--
>Gary Fiber K8IZ
>GROL PG-19-6691 with Shipboard Radar Endorsement
>Washington State Resident
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html