[ICOM] GaAsfet for AG-35 pre-amp

[Alberto Rojas A.]

Hi, did you try at www.rfparts.com ?
Good luck oin your search 
Alberto 
YV-3-EDO /6 
Sent using Blackberry Movilnet

-----Original Message-----
From: Paul <w2ec at bmjsports.com>
Sender: icom-bounces at mailman.qth.net
Date: Sun, 25 Sep 2011 09:11:02 
To: <icom at mailman.qth.net>
Reply-To: ICOM Reflector <icom at mailman.qth.net>
Subject: [ICOM] GaAsfet for AG-35 pre-amp

Bought a AG-35 432mc pre-amp and sure enough -- looks like GaAsfet is blown, no increase in noise or anything when the pre-amp is switched on. Tested it before installation to ensure the relay was operating ok to switch the pre-amp in and out of the circuit and relay appeared to be functioning normally, but pre-amp itself has no effect when powered up. Anyone know where to get the 3SK121 GaAsfet, or know of a suitable/available substitute?
 
73, Paul W2EC
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html