[ICOM] 2KL and AT-500 acc connectors

[James Meaney]

   Check out W2ENY, he has an EBAY store and sells the 24 pin cables for 
the 2KL and the AT500 tuner. I purchased them from him I believe they go 
for around $35.00






On 3/13/2011 10:26 PM, Gary P. Fiber wrote:
> I don't think Molex made them but they do make some that are pretty close.
> Also even though there are 24 pins you may not need all of them so
> something smaller may work in it s place. Grab up your manuals for both
> products and see what pins are used between the two.
> Sometimes inserting a small tool beside the metal female socket and
> plastic shell will tighten then up a bit.
>



> Gary K8IZ
>
>
> On 3/13/2011 7:00 PM, Paul Beringer wrote:
>> I have both of these items and the ACC connectors (female and male) are
>> getting quite loose. The pins and mating sockets are not making good contact
>> with the result being intermittent amp operation and failure to follow the
>> bands I'm using. Kuni W7JV told me these are no longer available thru Icom.
>> Does anyone have ideas about replacing them short of hard wiring them?
>> Thanks
>> Paul NG7Z
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>