[ICOM] 2KL and AT-500 acc connectors

[Gary P. Fiber]

I don't think Molex made them but they do make some that are pretty close.
Also even though there are 24 pins you may not need all of them so 
something smaller may work in it s place. Grab up your manuals for both 
products and see what pins are used between the two.
Sometimes inserting a small tool beside the metal female socket and 
plastic shell will tighten then up a bit.

Gary K8IZ


On 3/13/2011 7:00 PM, Paul Beringer wrote:
> I have both of these items and the ACC connectors (female and male) are
> getting quite loose. The pins and mating sockets are not making good contact
> with the result being intermittent amp operation and failure to follow the
> bands I'm using. Kuni W7JV told me these are no longer available thru Icom.
> Does anyone have ideas about replacing them short of hard wiring them?
> Thanks
> Paul NG7Z
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with shipboard radar endorsement
Washington State resident