[ICOM] 756pro remote

[ZL2AAA]

We had this problem before we went to the Chatham isld .The answer was on 
the Writelog archives or FAQ;s I think it was something to do with the 
address 5ah etc Writelog wanted something different.Morrie

----- Original Message ----- 
From: "Ken Eigsti" <diverken at chaffee.net>
To: <icom at mailman.qth.net>
Sent: Monday, March 14, 2011 8:19 AM
Subject: [ICOM] 756pro remote


> Hi
> For some reason I am not able to get the 756pro to interface with my
> computer with the Writelog contest program. Two other 756pro3s are 
> connected
> to separate computers with no problems.
>
> The CI-V is installed and the band map is populated on the computer, but 
> in
> WL the box at the lower left shows NO RIG. I've gone into  PORTS in WL and
> made sure that the box on COM 3 has the 756pro pull down as rig.
>
> On the 756pro
> CIV Baud Rate  9600 (Tried AUTO too)
> CIV Address is 5ch (default)
> CIV Transceive is ON
> CIV with IC 731 is ON (tried OFF too)
>
>
> Something is preventing the rig from "talking" to the computer. Any ideas 
> as
> where I should check next?
>
> Wasn't sure whether to post this on ICOM or WRITELOG reflector?.
>
> Thanks
> Ken W0LSD
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html