[ICOM] ICOM IC-32AT HT

[Stephen Budensiek]

Ted,
   If all else fails, wire a TS-32 tone encoder in.   They're small,
uses dipswitches to program.   Just put a chart on the back of the
radio for the tone settings you need, extend the dipswitch to the back
also if you need.   It will work with any radio.   I've done that to
several of the old radios, commercially and ham radio related.

73's de Stephen, K0SD in TX

*********************************************

On Mon, Jun 27, 2011 at 11:31 AM, Ted Trostle <ttrostle35 at gmail.com> wrote:
> I have  an old IC_32AT HT that I just do not want to give up as it works
> good and has many of the features new units have today.
>
> There is an accessory, UT-40, which when installed allows use of "tone
> squelch"
>
> Where can I find one?
>
> Ted, WB2LOU
>
> And will it work with the regional NOAA weather stations ?
> --
> You cannot change history, but you can make history !
> Education is the only legal cure for stupidity.
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>