[ICOM] ICOM IC-9100 RF POWER LEVELS

[n6eq at juno.com]

Hi Adam,
 Thanks for the information... I will check into the CI-V and software
program.

7 3 de N6EQ
Chuck

On Sun, 31 Jul 2011 14:41:22 -0700 "Adam Farson" <farson at shaw.ca> writes:
> Hi Chuck,
> 
> No, there is no hidden menu for power-output setting by band. The RF 
> Power
> knob is the only power control, but there is also a CI-V command to 
> set/read
> RF Power setting. One could conceivably write a software program to 
> manage
> power output by band.
> 
> IC-9100 information: http://www.ab4oj.com/icom/ic9100/main.html
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> ***********
> I just bought a new ICOM IC-9100, is there anyone in the group that 
> own
> one, that know if there is a hidden menu to reduce the rf output on 
> each
> band? 
>   I'm trying to set the RF power control on the front of the radio 
> to
> max... and set the RF power to the proper drive level for each 
> amplifier
> 144,432,1.2 GHz.
>   so I don't have to adjust the RF control on the radio... I know 
> the
> IC-910H has the hidden menu. Thanks in advance...
>   Thanks in advance...
> 
> 7 3 de N6EQ
> Chuck
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 

____________________________________________________________
Get Free Email with Video Mail & Video Chat!
http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210