[ICOM] FL63A Filter vs. FL101

[Nathan Moreschi]

Thanks Gary.

Nate
----- Original Message ----- 
From: "Gary P. Fiber" <gfiber at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, January 20, 2011 8:19 AM
Subject: Re: [ICOM] FL63A Filter vs. FL101


> Nate,
>
> So far as I remember the FL-63A was a solder in and the FL-101 was plug 
> in.
> I seem to remember some impedance differences between the two filters
> and possible center frequency.
> Could mean circuit changes and BFO readjustments to get it to work.
> if you can't find a FL-63A you may be better off purchasing an Inrad
> filter and wiring it in.
>
> Gary K8IZ
>
> On 1/19/2011 8:46 PM, Nathan Moreschi wrote:
>> Icom group,
>>
>> Will an FL101 fit in the slot for an FL63A for an ICOM 751?
>>
>> 73,
>>
>> Nate/N4YDU
>> ----- Original Message -----
>> From: "Nathan Moreschi"<n4ydu at yahoo.com>
>> To: "ICOM Reflector"<icom at mailman.qth.net>
>> Sent: Wednesday, January 19, 2011 9:32 PM
>> Subject: [ICOM] WTB: FL63A Filter
>>
>>
>>> Icom group,
>>>
>>> I'm looking for an ICOM FL63A filter. Anyone have one they would sell?
>>>
>>> 73,
>>>
>>> Nate/N4YDU
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>
>
> -- 
> Gary Fiber K8IZ
> GROL PG-19-6691 with shipboard radar endorsement
> Washington State resident
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html