[ICOM] IC-2720 Cross-band repeat?

[Steve Lewis]

Sure.

VHF on the left band, UHF on the right band.

Press DUP, LOW, and SET at the same time, for about 1 second.  Just 
press "SET" (for about 1 second) to turn it off.

-73- de N8TFD/Steve

On 1/3/2011 11:12 PM, k3hx at juno.com wrote:
> Can the IC-2720 be configured for cross-band repeat wherein a signal that opens the squelch on 2m will key up the TX on 440 and unkey the
> 440 TX when the 2m RX signal drops out?
>
> If this is possible, I'd be grateful for instructions as to how it might be realized.
>
> 72,
>
> Tim
>
> ____________________________________________________________
> Refinance Rates at 2.8%
> $160,000 Mortgage $434/mo. No Hidden Fees- 3.1% APR! Get a Free Quote
> http://thirdpartyoffers.juno.com/TGL3131/4d229e5fe8ab49d9775st02duc
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>