[ICOM] IC-756 Pro 3 Question

[Conrad & Kathi Nasatka]

Larry:
What kind of ICOM are you working with?
Conrad
WB3DQD
----- Original Message ----- 
From: "Larry Young" <k4lxv at bellsouth.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, February 18, 2011 4:44 PM
Subject: Re: [ICOM] IC-756 Pro 3 Question


Verify your jumper settings per page 8 and 9 of the signalink USB manual. It 
appears your ptt line to the pro is not operating. Is the transmit light on 
the Pro coming on? If so, it is an audio level problem. If not, then it may 
be a ptt line selection problem.
Larry K4LXV

--- On Fri, 2/18/11, Conrad & Kathi Nasatka <konco at ptd.net> wrote:

From: Conrad & Kathi Nasatka <konco at ptd.net>
Subject: Re: [ICOM] IC-7656 Pro 3 Question
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Friday, February 18, 2011, 3:05 PM

Larry:
Are you saying the PTT needs to be implimented?
Can't find it in the manual
Conrad
----- Original Message ----- 
From: "Conrad & Kathi Nasatka" <konco at ptd.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, February 18, 2011 2:32 PM
Subject: Re: [ICOM] IC-7656 Pro 3 Question


QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html