[ICOM] is there some sort of protector on the RX ANT input of a 756 Pro?

[ww3s at zoominternet.net]

	Thanks Larry, is it easy to get to and replace? What type of bulb?  
 On Tue 02/ 8/11 9:32 PM , Larry Young k4lxv at bellsouth.net sent:
  Jamie, there is, I believe  a small lamp in series with the RX ant
input. But do not just replace it, and then ignore, as you could
damage your transceiver board if you do not have some external
protection of your separate receive ant input. . There are several
places on the internet that offer separate receive protector devices.
 Larry K4LXV
 --- On Tue, 2/8/11, Jamie WW3S  wrote:
 From: Jamie WW3S 
 Subject: [ICOM] is there some sort of protector on the RX ANT input
of a 756 Pro?
 To: icom at mailman.qth.net [3]
 Date: Tuesday, February 8, 2011, 8:46 PM
 RX ant was working fine until tonight, when it suddenly went dead.
Is there some sort of protection on the input that might have blown?
Receive is still fine thru the regular antenna. If I blew something,
how hard is it to change, and what can be done to repvent it from
happening again? 
 ----
 Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net [4]
 Icom Users Net: Sundays, 1700Z, 14.316 MHz
 Icom FAQ: http://www.qsl.net/icom/ [5]
 To support QSL/QTH.net: http://www.qsl.net/donate.html [6]
 ----
 Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net [7]
 Icom Users Net: Sundays, 1700Z, 14.316 MHz
 Icom FAQ: http://www.qsl.net/icom/ [8]
 To support QSL/QTH.net: http://www.qsl.net/donate.html [9]


Links:
------
[1] mailto:ww3s at zoominternet.net
[2] mailto:ww3s at zoominternet.net
[3] mailto:icom at mailman.qth.net
[4] mailto:icom-owner at mailman.qth.net
[5] http://www.qsl.net/icom/
[6] http://www.qsl.net/donate.html
[7] mailto:icom-owner at mailman.qth.net
[8] http://www.qsl.net/icom/
[9] http://www.qsl.net/donate.html