[ICOM] IC-2AT PL encoder

[Dave Edwards]

I gutted my old IC-2A.
Indeed it IS a Com Spec unit  (sorry all!!)
But, of course an outdated one  :-(

Com Spec's web site has it as a ....
9610 SS32M

It is a Fax on Demand list, but when I get down to the bottom of the list 
(where the 9610 is) It will no longer
allow the item to be highlighted and downloaded.

No switch on the unit, so I have no idea how I set the PL back 
then...probably soldered something???

Anyone know how I can find info on the SS32M??

....Dave
----- Original Message ----- 
From: "Dave Edwards" <kd2e at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, February 04, 2011 2:11 PM
Subject: Re: [ICOM] IC-2AT PL encoder


> I'll either get that one, or gut the old one out of my old IC-2AT.
> As old as it is...I still love that rig for the original reasons...
> Simple, reliable, sounds good, perfect size. Sure don't have any menus to
> remember, and don't have
> to go to the manual to figure how to switch plus offset to minus offset!!!
>
> ....Dave
> ----- Original Message ----- 
> From: "Gary P. Fiber" <gfiber at comcast.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Friday, February 04, 2011 1:49 PM
> Subject: Re: [ICOM] IC-2AT PL encoder
>
>
>> Midian?
>> http://www.midians.com/html/specspage.asp?pname=TDS-1&ptitle=CTCSS+Encoder+Decoder+%26amp%3Bamp%3B+DCS+Encoder+Decoder&pcat=Encoders%2FDecoders&pline=Tone+Signaling
>>
>> CES  http://www.ceswireless.com/ctcss.htm
>>
>> Selectone was another and they were bought out by Comm-Spec.
>>
>> Good luck as the one you desire may no longer be in production.
>> The Comm-Spec SS-64 is a good encoder, lots of them in IC-2AT's
>>
>> Gary K8IZ
>>
>> On 2/4/2011 9:50 AM, Dave Edwards wrote:
>>> That is the company that makes them still...but as I recall, there was
>>> another company
>>> back in the late '70, early '80s making tone encoders. Mine was from the
>>> other company  :-(
>>>
>>> ....Dave
>>>
>>> ----- Original Message -----
>>> From: "D C *Mac* Macdonald"<k2gkk at hotmail.com>
>>> To: "Icom Forum"<icom at mailman.qth.net>
>>> Sent: Friday, February 04, 2011 11:05 AM
>>> Subject: Re: [ICOM] IC-2AT PL encoder
>>>
>>>
>>>> It was probably from Comm-Spec.  Google it.
>>>>
>>>> * * * * * * * * * * *
>>>> * 73 - Mac, K2GKK/5 *
>>>> * (Since 30 Nov 53) *
>>>> * Oklahoma City, OK *
>>>> * USAF, Ret (61-81) *
>>>> * * * * * * * * * * *
>>>>
>>>>
>>>>
>>>> ----------------------------------------
>>>>> From: kd2e at comcast.net
>>>>> To: icom at mailman.qth.net
>>>>> Date: Fri, 4 Feb 2011 11:01:48 -0500
>>>>> Subject: [ICOM] IC-2AT PL encoder
>>>>>
>>>>> My original IC-2AT had an encoder that I put in it back in the day.
>>>>> I don't remember the brand, but I think they are out of business.
>>>>> What was nice is that it was thin as a piece of cardboard, and sat
>>>>> in-between
>>>>> the two hinged together circuit boards.
>>>>>
>>>>> You could change tones, but the switch was a VERY small
>>>>> arrangement...you
>>>>> had to use a probe or pencil
>>>>> or something to change 'em.
>>>>>
>>>>> Is anything similar still available? Got a new (yes, unused) 
>>>>> 2AT....and
>>>>> would like to put one in it. But don't feel like
>>>>> doing the horrible square cutting through the plastic that some have
>>>>> been
>>>>> destroyed with.
>>>>>
>>>>> One tone, set and forget would be fine by me.
>>>>>
>>>>> Thanks for any input!
>>>>>
>>>>> .....Dave
>>>>> ----
>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>
>>
>> -- 
>> Gary P. Fiber K8IZ
>>
>> General Radio Telephone Operators License PG-19-6691,
>> with Shipboard Radar Endorsement.
>> Washington State Resident.
>>
>> Confidentiality Notice: This e-mail message, including any attachments, 
>> is
>> for the sole use of the intended recipient (s) and may contain
>> confidential and privileged information.
>> Any unauthorized review, use, disclosure or distribution is prohibited. 
>> If
>> you are not the intended recipient, please contact the sender by reply
>> e-mail and destroy all copies of the original message.
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html