[ICOM] IC-2AT PL encoder

[Gary P. Fiber]

Midian?  
http://www.midians.com/html/specspage.asp?pname=TDS-1&ptitle=CTCSS+Encoder+Decoder+%26amp%3Bamp%3B+DCS+Encoder+Decoder&pcat=Encoders%2FDecoders&pline=Tone+Signaling

CES  http://www.ceswireless.com/ctcss.htm

Selectone was another and they were bought out by Comm-Spec.

Good luck as the one you desire may no longer be in production.
The Comm-Spec SS-64 is a good encoder, lots of them in IC-2AT's

Gary K8IZ

On 2/4/2011 9:50 AM, Dave Edwards wrote:
> That is the company that makes them still...but as I recall, there was
> another company
> back in the late '70, early '80s making tone encoders. Mine was from the
> other company  :-(
>
> ....Dave
>
> ----- Original Message -----
> From: "D C *Mac* Macdonald"<k2gkk at hotmail.com>
> To: "Icom Forum"<icom at mailman.qth.net>
> Sent: Friday, February 04, 2011 11:05 AM
> Subject: Re: [ICOM] IC-2AT PL encoder
>
>
>> It was probably from Comm-Spec.  Google it.
>>
>> * * * * * * * * * * *
>> * 73 - Mac, K2GKK/5 *
>> * (Since 30 Nov 53) *
>> * Oklahoma City, OK *
>> * USAF, Ret (61-81) *
>> * * * * * * * * * * *
>>
>>
>>
>> ----------------------------------------
>>> From: kd2e at comcast.net
>>> To: icom at mailman.qth.net
>>> Date: Fri, 4 Feb 2011 11:01:48 -0500
>>> Subject: [ICOM] IC-2AT PL encoder
>>>
>>> My original IC-2AT had an encoder that I put in it back in the day.
>>> I don't remember the brand, but I think they are out of business.
>>> What was nice is that it was thin as a piece of cardboard, and sat
>>> in-between
>>> the two hinged together circuit boards.
>>>
>>> You could change tones, but the switch was a VERY small arrangement...you
>>> had to use a probe or pencil
>>> or something to change 'em.
>>>
>>> Is anything similar still available? Got a new (yes, unused) 2AT....and
>>> would like to put one in it. But don't feel like
>>> doing the horrible square cutting through the plastic that some have been
>>> destroyed with.
>>>
>>> One tone, set and forget would be fine by me.
>>>
>>> Thanks for any input!
>>>
>>> .....Dave
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary P. Fiber K8IZ

General Radio Telephone Operators License PG-19-6691,
with Shipboard Radar Endorsement.
Washington State Resident.

Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.