[ICOM] IC-2AT PL encoder

[Dave Edwards]

That is the company that makes them still...but as I recall, there was 
another company
back in the late '70, early '80s making tone encoders. Mine was from the 
other company  :-(

....Dave

----- Original Message ----- 
From: "D C *Mac* Macdonald" <k2gkk at hotmail.com>
To: "Icom Forum" <icom at mailman.qth.net>
Sent: Friday, February 04, 2011 11:05 AM
Subject: Re: [ICOM] IC-2AT PL encoder


>
> It was probably from Comm-Spec.  Google it.
>
> * * * * * * * * * * *
> * 73 - Mac, K2GKK/5 *
> * (Since 30 Nov 53) *
> * Oklahoma City, OK *
> * USAF, Ret (61-81) *
> * * * * * * * * * * *
>
>
>
> ----------------------------------------
>> From: kd2e at comcast.net
>> To: icom at mailman.qth.net
>> Date: Fri, 4 Feb 2011 11:01:48 -0500
>> Subject: [ICOM] IC-2AT PL encoder
>>
>> My original IC-2AT had an encoder that I put in it back in the day.
>> I don't remember the brand, but I think they are out of business.
>> What was nice is that it was thin as a piece of cardboard, and sat 
>> in-between
>> the two hinged together circuit boards.
>>
>> You could change tones, but the switch was a VERY small arrangement...you 
>> had to use a probe or pencil
>> or something to change 'em.
>>
>> Is anything similar still available? Got a new (yes, unused) 2AT....and 
>> would like to put one in it. But don't feel like
>> doing the horrible square cutting through the plastic that some have been 
>> destroyed with.
>>
>> One tone, set and forget would be fine by me.
>>
>> Thanks for any input!
>>
>> .....Dave
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html