[ICOM] ICOM PS-125

[Pete ....]

Thank you, Adam. 
Looking at the schematic, there should be no reason for
no DC output with the LED shining brightly.
What am I missing?
73,
Peter NH6VB

--- On Sat, 1/30/10, Adam Farson <farson at shaw.ca> wrote:

> From: Adam Farson <farson at shaw.ca>
> Subject: Re: [ICOM] ICOM PS-125
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Saturday, January 30, 2010, 3:07 PM
> Hi Peter,
> 
> Here are a PS125 service manual and schematic:
> 
> http://www.qsl.net/icom/manuals.html
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of Pete ....
> Sent: 30-Jan-10 16:49
> To: ICOM Reflector
> Subject: [ICOM] ICOM PS-125
> 
> I purchased an used ICOM PS-125 via the Internet, DOA. I
> have no reasons to
> believe that this was intentional. The seller is working
> with me on that
> problem.
> 
> The issue: Red power light comes on, no output. I did open
> the outer cover,
> but to get to the guts of the PS is a major project, and I
> left that alone
> for now.
> 
> My question is: What could be the problem, and what is the
> repair cost if I
> return the PS to ICOM for servicing. There is no ICOM
> service center here in
> Hawaii.
> 
> I feel that there is no major issue, but only guessing in
> the absence of a
> schematic. Any help or suggestion is welcome.
> 
> 73,
> Peter NH6VB
> 
> 
> 
>       
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>