[ICOM] IC-745 Meter Lamp Replacement

[Dwayne]

http://www.replacementlightbulbs.com/lampshardtofindnumber.html

Try this.. Its a good site for bulbs.. I've got a number of hard to get 
bulbs there..
  Dwayne    ve6qx
----- Original Message ----- 
From: "Mike Olbrisch" <mike-2007 at elp.rr.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Monday, January 18, 2010 9:13 PM
Subject: Re: [ICOM] IC-745 Meter Lamp Replacement


> The ICOM bulbs may still be available - but expensive.  However, they do 
> last a
> bit.
>
> If you switch to Rat-Shack bulbs - they are easy to get - however, they do 
> not
> last.
>
> I recommend you switch it to a high-intensity LED.  Do it once, and be 
> done with
> it.
>
> Mike - KD9KC.
> El Paso, Tx.
> DM61rt
>
> Molon labe. [mo-lone lah-veh] Google it...
>
> =============================================
> The United States Constitution (c) 1791. All Rights reserved.
> =============================================
>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
>> On
> Behalf
>> Of M. J. Taylor
>> Sent: Monday, January 18, 2010 8:49 PM
>> To: icom at mailman.qth.net
>> Subject: [ICOM] IC-745 Meter Lamp Replacement
>>
>> Greetings!
>>
>> This is my first post as an Icom user, so here goes...
>>
>> I have had an IC-745 for about 2 years now but just started using it on-
> the-air recently.
>> (My "other" rig is a Drake C line)  I really love using the 745 plus its 
>> my
> first solid-state
>> radio.  My question is:  Is the meter lamp still available from Icom, or 
>> is
> there 'suitable'
>> replacement out there like the sub-mini bulbs Radio Shack carries?  I see 
>> they
> have a 12
>> volt, 25 ma bulb that is small enough to fit.
>>
>> Also, aside from the MEM Battery issue, what would cause an abrupt 4kHz 
>> shift
> (up) while
>> in receive mode?  I have heard/seen this happen a number of times since 
>> I've
> had it.  I
>> don't have the freq. marker board, but the rig does actually calibrate ok 
>> with
> my homebrew
>> marker generator.  Seems to happen only after its been on awhile.  (heat
> issue??)
>>
>> Any help would be great!
>>
>> Thanks!
>>
>> Milt Taylor
>> WA3MDS
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html