[ICOM] Icom HM-8 mic and other items FS

[Ken Simpson, W8EK]

For Sale:


Icom HM-8 touchtone microphone:

The HM-8 has a 12 digit touch tone (DTMF) pad on the front
of it, along with an on-off switch for the tones. Of course
it also has the normal PTT switch.

The HM-8 is used on the 25A Red LED, 245, 290, 402, 202S, 451,
471A, plus other rigs.

This particular microphone has an 8 pin round connector, works
fine, is in its original box, and includes paper work for $50.


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom
manuals and are not copies.
All are in very good condition.
These are original manuals only.

        BC-30 Desk Charger $5
        BC-35 Desk Charger $7
        BP-2, BP-3, BP-4, BP-5 battery packs  $3
        BP-21, BP-22, BP-23, and BP-24 Batteries $3
        DC-1 DC pack for IC-2 AT series HTs $4
        HM-8 Hand Microphone, w/schematic  $5
        IC-22 S, 2 m FM transceiver $12
        IC-229, 2 meter mobile transceiver $15
        IC-3 PA Power supply / speaker $10
        UT-16 Voice Synthesizer $5

These are original manuals only.


Selectone ST-131 Subaudible PL tone encoder
If you need subaudible tones, this unit will add them
to the Icom IC-2AT, 3AT, 4AT, and others of that series
that lacked the tones originally.  It is a postage stamp
size unit.  This one has never been used, and is still
in its original plastic bag, with the instructions. $30


Coax connectors and adapters:
Prices are per connector. Several of each are available.
These are NOS (have not been used).

BNC male for coaxial cable
standard type $2
crimp on type $3

Chassis mount BNC female
square mount (uses 4 screws), $3
screw in type, $4

BNC 90 degree, female to male $3

BNC "T" - two female and one male $3

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection $5

Antenna adapter for Kenwood TH-21/31/41 HTs
Adapts the antenna connector found on these HTs to a
standard PL-259 connector. $6


Rubber Duck antennas for your HT.

All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

Regular length BNC, 6.6 inches long
Alinco Stubby w/BNC Connector, 4.6 inches long

5/16 inch threaded, as used by Motorola and others
Stubby, 4 inches long

Type F connector, 6.5 inches long

PL-259 connector, 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby, 4.6 inches long
Centurion, still in original package

BNC Stubby for 440 MHz, 3 inches long


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400