[ICOM] IC-735 VCO Cap Replacement

[Bruce]

Either side works ok..but end farthest away from the shield is the usual spot.

At 07:11 AM 2/21/2010, Michael, W1RC wrote:
>I am finally getting around to replacing the four trimmer caps in the
>VCO.  I am certain that this topic has been well covered and I have
>found some information through searching Google.
>
>The one question I have that has not been covered is:  What side of
>R108 should be used to measure the 6.5 Volts?  Since I don't have a
>schematic I would only be guessing.
>
>Any other tips in performing this repair would be greatly appreciated.
>
>73,
>
>Michael, W1RC
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 9.0.733 / Virus Database: 271.1.1/2700 - Release Date: 
>02/20/10 11:34:00