[ICOM] ICOM PS-125

[Pete ....]

Hi Adam,
As last ditch effort to send the PS-125 in for repair, I opened it up to verify that the slip on connectors on the 12VDC power cord are intact. The 12VDC power cord ohms out o.k and slip on connectors fit fine and tight.
I do not have any voltage at the slip on board. The power light comes on, so will the fan, if the PS warms up enough. Do you have any idea what to look for? Can you recommend a repair facility other than ICOM, to cut back on the turnaround time? Any suggestion is aprechiated. I like to have the PS back and working as soon as possible.
73,
Peter NH6VB

--- On Sat, 1/30/10, Adam Farson <farson at shaw.ca> wrote:

> From: Adam Farson <farson at shaw.ca>
> Subject: Re: [ICOM] ICOM PS-125
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Saturday, January 30, 2010, 3:07 PM
> Hi Peter,
> 
> Here are a PS125 service manual and schematic:
> 
> http://www.qsl.net/icom/manuals.html
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ