[ICOM] tuning knob skirt

[nagel.david at sbcglobal.net]

How about using superglue to hold the rubber to the wheel? Slit the rubber and apply the glue to the knob. Press the rubber ribbon to the dial and cut the excess off after completing the attachment. Might work or might not. 

Dave W2OVP

--- On Mon, 12/13/10, Alan Leith <aleith at syd.eastlink.ca> wrote:

> From: Alan Leith <aleith at syd.eastlink.ca>
> Subject: Re: [ICOM] tuning knob skirt
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Monday, December 13, 2010, 4:56 PM
> I don't know if "skirt" is the right
> name, Gary, but everyone knew what I
> was talking about.  And thanks to all for their
> comments and ideas.
> 
> The rubber outer sleeve on my tuning knob seems to have
> elongated or
> stretched.  When I tried to tape it, the last time,
> there was a little
> bulge that couldn't be eliminated, even when I put a tie
> wrap on it.  
> 
> There's nothing wrong with the knob, itself, and it is
> purely aesthetic
> from my point of view.  I'd prefer to not have to buy
> a new knob, of
> course, but had hoped that if someone had an old junker of
> a 761 or 765
> around, I could simply get a "used" knob, just for the
> rubber band that
> circles it.
> 
> I've got no idea why the one I have would now be larger
> than it was when I
> got the rig but it is!
> 
> 
> 73
> 
> Al, VE1AL
> 
> 
>    
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of Gary P. Fiber
> Sent: Monday, December 13, 2010 5:53 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] tuning knob skirt
> 
> Is a "skirt" the right name? Might be the parts folks don't
> understand what
> you are asking for. I forget what I used to call them,
> maybe rubber knob
> cover.
> Icom used to have them for some of the older radios. Maybe
> the factory is
> not able to buy them as a part only with the entire tuning
> knob anymore.
> 
> Gary K8IZ
> 
> On 12/13/2010 1:33 PM, k0bx at arrl.net
> wrote:
> > The rubber skirt fellow off of my Pro3 Knob.  I
> used double sided 
> > tape.  But I called Icom and asked them about
> it.  They did not have 
> > the rubber skirt for the
> > Pro3 knob.  I bought a brand new knob.  I am
> not going to use it, 
> > instead keep it for when I sell the rig.
> >
> > Since the Icom guy did check on a skirt only part,
> maybe the earlier 
> > models had that as a individual part?
> > It would be worth a phone call.
> >
> > Joe K0BX
> >
> >   Stop the insanity!
> > Please do not add me to any distribution lists (Joke,
> Stories or Junk) 
> > without my permission.
> >
> >
> >
> >
> > ________________________________
> > From: Alan Leith<aleith at syd.eastlink.ca>
> > To: ICOM Reflector<icom at mailman.qth.net>
> > Sent: Mon, December 13, 2010 1:40:42 PM
> > Subject: [ICOM] tuning knob skirt
> >
> > The rubber skirt for the tuning knob on my '761 seems,
> over the years, 
> > to have stretched.  It now sits loosely on the
> knob and this has 
> > become an annoyance to me.
> >
> > Does anyone know where I might be able to beg, borrow
> or steal (or 
> > buy, if I have to) a skirt that will fit more tightly
> on my tuning knob?
> >
> > Currently I have a tie wrap holding it in place and I
> have tried 
> > double-faced tape that only gums things up and doesn't
> work well at all.
> > The tie wrap is both unsightly and uncomfortable when
> I tune.
> >
> > Any help would be appreciated.
> >
> > 73
> >
> > Al, VE1AL
> >
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom 
> > Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> > http://www.qsl.net/icom/ To support QSL/QTH.net: 
> > http://www.qsl.net/donate.html
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom 
> > Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> > http://www.qsl.net/icom/ To support QSL/QTH.net: 
> > http://www.qsl.net/donate.html
> >
> 
> 
> --
> Gary P. Fiber K8IZ
> 
> General Radio Telephone Operators License PG-19-6691, with
> Shipboard Radar
> Endorsement.
> Washington State Resident.
> 
> Confidentiality Notice: This e-mail message, including any
> attachments, is
> for the sole use of the intended recipient (s) and may
> contain confidential
> and privileged information.
> Any unauthorized review, use, disclosure or distribution is
> prohibited. If
> you are not the intended recipient, please contact the
> sender by reply
> e-mail and destroy all copies of the original message.
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>