[ICOM] amp & ICOM question

[Mike]

Is the Pro III output controlled by the Pro III's ALC?  If so, make sure you
don't overdrive the amp. due to initial full output from the Pro III.

On Sun, Dec 12, 2010 at 3:18 PM, Don Cunningham <wb5hak at martineer.net>wrote:

> Just be SURE to keep the drive low, at least at tuneup, Larry.  Not much
> needed to get to 1500w PEP with these newer amps.  My 8410 will scare you,
> hi.
> 73,
> Don, WB5HAK
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>



-- 
   73,
   Mike, K4GMH