[ICOM] amp & ICOM question

[w6omf]

Will do... looked and read a lot the last couple days and it just looks to
easy... rca to rca and a coax...amazing... no alc etc... thanks much...73

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Larry Young
Sent: Sunday, December 12, 2010 9:49 AM
To: ICOM Reflector
Subject: Re: [ICOM] amp & ICOM question

Larry; Congratulations on your ProIII-Alpha amp combo. That sounds awesome.
I would suggest that you verify the keying voltage of the 8406 does not
exceed what the ProIII can safely handle. Those voltages were at one time
posted on the old Alpha website, but that site has now been replaced. Alpha
amps over the years have used various keying voltages. The 8406 is very
likely OK to be keyed by the pro, but I suggest you double check. FYI see 
www.qsl.net/icom/keyspecs.html
Larry K4LXV.

--- On Sun, 12/12/10, w6omf <w6omf at cwnet.com> wrote:

From: w6omf <w6omf at cwnet.com>
Subject: [ICOM] amp & ICOM question
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Date: Sunday, December 12, 2010, 12:14 PM

Anyone using the newer alpha amps with their PROIII... I'm trying to avoid
any overlooked pitfalls I might have missed... a 8406 being driven with the
PROIII is the setup... thanks much...73 Larry


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html