[ICOM] IC761 problem

[Robert Brucker]

When the  displays -5v is out, you will have dashes and the S meter reading at half. Robert W6LFO
On Aug 17, 2010, at 10:53 PM, zl3kr wrote:

> Robert, the Frequency readout is working perfectly and the "S" meter
> reads normally.
> Gary thanks for the tip re -5 volts will check that out, I will look at 
> that first then if ok will
> see if I can sort out whether the PLL voltages are correct.
> Darned Winter weather has been too cold to go out to the garage to work 
> on it the
> past few days but think it is due to improve over the next few days.
> 
> Alan ZL3KR
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html