[ICOM] FL32 vs FL100

[Fred Ockert]

Nathan Moreschi schrieb:
> Thanks for the responses!
>
> 73,
>

but you can solder a FL100 on a FL32 place ... did huere so in some 
IC735 er. Pin layout differs a few millimeters...but wires are long enough

Fred
dl5ym

> Nate/N4YDU
> ----- Original Message -----
> From: "Adam Farson"<farson at shaw.ca>
> To: "'ICOM Reflector'"<icom at mailman.qth.net>
> Sent: Monday, August 09, 2010 11:08 PM
> Subject: Re: [ICOM] FL32 vs FL100
>
>
>> Hi Nate,
>>
>> I do not think so. As I recall, the pin layouts are not compatible.
>>
>> Cheers for now, 73,
>> Adam VA7OJ/AB4OJ
>>
>>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
>> On
>> Behalf Of Nathan Moreschi
>> Sent: 9-Aug-10 19:46
>> To: ICOM Reflector
>> Subject: [ICOM] FL32 vs FL100
>>
>> Greetings,
>>
>>
>>
>> Are the FL32 filter and FL100 interchangeable?
>>
>>
>>
>> 73,
>>
>>
>>
>> Nate/N4YDU
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>