[ICOM] PS 35 IC1.

[Mike Olbrisch]

Make sure that copper bar is soldered in real good - that is a common failure
point in those supplies.  But if it is the opto-coupler....  good luck.  That
part is no longer available and this forced me to buy a spare working supply
years ago - just in case.  I re-capped the whole thing and put it on the shelf
just for that eventuality.

You might shop for a bad supply from someone else - and use it for parts.

Mike - KD9KC.
El Paso, Tx.
DM61rt

Molon labe. [mo-lone lah-veh] Google it...

=============================================
The United States Constitution (c) 1791. All Rights reserved.
============================================= 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf
> Of James R. Bartlett
> Sent: Wednesday, April 28, 2010 3:28 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] PS 35 IC1.
> 
> Hi Guys,
> I am looking for help in locating the N110 Photocoupler used in the PS35
> power supply.
> I have an IC 765  whose power unit has packed up. Suspecting the
> Photocoupler. Other thoughts as to possible faults welcome.
> 
> Any help much appreciated.
> 73's
> Jim, Ei2BB
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html