[ICOM] IC-781 CIV converter problem

[Larry Young]

Lee; Before you do anything such as replacing your converter etc, Take a look at this site for troubleshooting hints:  http://www.plicht.de/ekki/civ/civ-p0a.html
Larry K4LXV

--- On Mon, 9/14/09, Lee Mairs (SAG) <lmairs at sagcorp.com> wrote:

From: Lee Mairs (SAG) <lmairs at sagcorp.com>
Subject: Re: [ICOM] IC-781 CIV converter problem
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Monday, September 14, 2009, 4:04 PM

Tom -
You are very generous, and I would like to take you up on your offer. 

I've tried just about everything except the CIV level converter.  I 
thought I had an original Icom one, but it is nowhere to be found.  I 
now I had it when I lived in Falls Church, but that was seven years ago!

My address is:
Lee Mairs
POB 1820
Romney, WV 26757

73 de Lee
KM4YY/8



Tom Norris wrote:
> Indeed, that should be the very first thing to check.  The next test  
> may be to substitute another level convertor, I have an extra USB  
> based cable I'll let you keep to help you get an idea of where the  
> problem is.  Send your address.  Free!  I picked up several for my  
> radios a few years ago, got rid of a radio or two, so have a couple  
> spares and you're welcome to one of them.
>
>
> Tom
>
>
> On 9/14/09, at 9:10 AM, Lee Mairs (SAG) wrote:
>   
>> The only other thing left (other than the IC-781) is the W1GEE  
>> serial to
>> CIV converter that plugs into the REMOTE hole on the IC 781.
>>
>> Any other ideas?
>>
>> 73 de Lee
>> KM4YY/8
>> Romney, WBGV
>>     
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>   
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html