[ICOM] PS-125

Mike nf4l at nf4l.com
Wed Nov 4 08:04:15 EST 2009


Yep, Dan you got I mean. Do you know which pair are the switch?

Mike

Dan Cotsirilos wrote:
> I don't think that is what he means? The Icom supplies need 2 pins to short 
> for the supply to work. The on off on the radio is for the both the supply 
> and the radio
>
> When he plugs it into his Pro 2 the radio shorts these pins on turn on.
>
> To use this supply with other radios these 2 pins must be manually 
> connected.
>
>
> Dan K9DTC
> ----- Original Message ----- 
> From: "Walt Heilsnis - WB2VSJ" <wb2vsj at earthlink.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Wednesday, November 04, 2009 6:03 AM
> Subject: Re: [ICOM] PS-125
>
>
>   
>> Mike,
>>
>> If you have shorted the + - temporarily, the unit will stop providing 
>> power until
>> the short is removed and you power cycle the PS-125.  I'm guessing you 
>> stuck the meter
>> probes into the plug and they shorted for a second while the unit was on?
>>
>>
>> Walt - WB2VSJ
>>
>> -----Original Message-----
>>     
>>> From: Mike <nf4l at nf4l.com>
>>> Sent: Nov 4, 2009 6:28 AM
>>> To: ICOM Reflector <icom at mailman.qth.net>
>>> Subject: [ICOM] PS-125
>>>
>>> What's the secret for getting some power to ooze out of a PS-125? I'd
>>> like to use one on some other gear, but when I try to read the plug, I
>>> get nil. Works fine on the PRO II though.
>>>
>>> 73, Mike NF4L
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>       
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html 
>>     
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>   




More information about the Icom mailing list