[ICOM] PS-125

[Dan Cotsirilos]

I don't think that is what he means? The Icom supplies need 2 pins to short 
for the supply to work. The on off on the radio is for the both the supply 
and the radio

When he plugs it into his Pro 2 the radio shorts these pins on turn on.

To use this supply with other radios these 2 pins must be manually 
connected.


Dan K9DTC
----- Original Message ----- 
From: "Walt Heilsnis - WB2VSJ" <wb2vsj at earthlink.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Wednesday, November 04, 2009 6:03 AM
Subject: Re: [ICOM] PS-125


> Mike,
>
> If you have shorted the + - temporarily, the unit will stop providing 
> power until
> the short is removed and you power cycle the PS-125.  I'm guessing you 
> stuck the meter
> probes into the plug and they shorted for a second while the unit was on?
>
>
> Walt - WB2VSJ
>
> -----Original Message-----
>>From: Mike <nf4l at nf4l.com>
>>Sent: Nov 4, 2009 6:28 AM
>>To: ICOM Reflector <icom at mailman.qth.net>
>>Subject: [ICOM] PS-125
>>
>>What's the secret for getting some power to ooze out of a PS-125? I'd
>>like to use one on some other gear, but when I try to read the plug, I
>>get nil. Works fine on the PRO II though.
>>
>>73, Mike NF4L
>>
>>----
>>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html