[ICOM] My IC-7600 report is now on-line!

[Anders Janis SM4RNA]

Ok. There is a mod for the Chineese version where one remove the 1M 
resistor and 10uF conected to ground and where the serial cap at 10uF is 
excanged for a 0,01uF. The mod is decribed at  
http://www.deimert.se/icom_hm36 It is in Swedish but I think you get the 
picture. The gain would than be that your settings would be the same as 
with the other mic's.

/Anders

Adam Farson wrote:
> Hi Anders,
>
> It is the Chinese version. The Japanese version is no longer delivered with
> Icom radios.
>
> In the course of my evaluation, I found that I was able to configure the
> audio settings with the HM-36 for very pleasant audio (as reported by
> distant stations.)
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>  
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Anders Janis SM4RNA
> Sent: 27-Mar-09 12:04
> To: ICOM Reflector
> Subject: Re: [ICOM] My IC-7600 report is now on-line!
>
> Is the HM-36 used the Japan or the Kina version?
>
> 73 de Anders
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>