[ICOM] missing screw

[Julio Peralta]

I don't know what power connector it has but I don't think it's the same as
the 706 series of radios. It turns off when ever he transmits at any power
level.

He needs a replacement screw for the separation cable.

Julio, W4HY

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of KD7JYK DM09
Sent: Friday, March 13, 2009 1:32 PM
To: ICOM Reflector
Subject: Re: [ICOM] missing screw

What kind of power connector is on that rig?  Under what conditions does it
turn off?

Kurt

----- Original Message -----
From: "Julio Peralta" <jperalta4 at verizon.net>

: Does anyone have an idea what is the size of the screw that
attaches/grounds
: the body side of the separation cable for the Icom 7000 and where it could
: be purchases. A friend of mine is having problems with the rig shutting
down
: and I think it's because he didn't install the screw because he lost it.

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH: http://www.qsl.net/donate.html