[ICOM] IC-706MkIIG - Can you increase the output level of the fixed audio output (Data and/or ACC)?

[Gary P. Fiber]

Mike,

I know of no way to adjust it. The spec says its 100 to 350 millivolts 
into a 4.7K ohm load from the factory. Should be plenty to drive your 
sound card. As other suggested you may want to use the mic input not the 
line level input to the sound card when using the Accessory socket 
detector output.
The level at the data jack is not specified so far as my scanning of the 
instruction manual found.

Gary K8IZ

Michael G. Carper wrote:
> Is it possible to increase the output level of the fixed AF output available
> at the data or ACC jack?
>
>  
>
> There's not enough AF coming from it to drive my sound card.
>
>  
>
> Mike, WA9PIE
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>