[ICOM] IC 775 parts needed (display)

[Vladimir Sidorov]

Such a connector at one of my IC-775 had more than 10 cold joints. 
Everything is fine again after re-soldering of each of them.

73,
Vladimir VE3IAE

---

----- Original Message ----- 
From: "W5JMW" <w5jmw at cableone.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Wednesday, July 08, 2009 3:30 PM
Subject: Re: [ICOM] IC 775 parts needed (display)


> Try re-seatting the ribbon connector that runs from the front to the
> underside of the main chassis.This is about a 12 or 15 flat ribbon
> connector.fixed mine..73 john
> ----- Original Message ----- 
> From: "Maciej Wieczorek" <sp2xf at wp.pl>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Wednesday, July 08, 2009 2:27 PM
> Subject: [ICOM] IC 775 parts needed (display)
>
>
>> GM from Poland,
>>
>> Looks like I'm having some trouble with the display on my IC 775 DXII.
>> While
>> turning on the dualwatch or split something strange is happening (some of
>> the figuers are not well visible, others are displaying too much, eg.
>> figure
>> 8 appears instead of 2, etc.) Turning off/on the radio resolves the
>> problem
>> for "some time" and than it happens again.
>>
>> I know there is common problem with icom's colour displays that were
>> manufactured for japaneese market versions of some models (in the past I
>> had
>> very similar problem with IC 736) so yesterday, with a little help of one
>> of
>> the japaneese Ham's I asked Icom Japan,  if they have replacemente parts
>> and
>> the answer is -unfortunately not. They don't have.
>>
>> Maybe someone here could help me? Where else I can ask for the parts, I
>> mean, maybe somewhere in USA they're having an old stock?
>>
>> The part number taken from service manual (for IC 775 DSP) is 5030001150,
>> ref.. DS1, part name "LCD HLC8617-012210"
>>
>> Thanks in advance
>> Best 73's
>> Mac SP2XF
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html