[ICOM] IC 775 parts needed (display)

[W5JMW]

Try re-seatting the ribbon connector that runs from the front to the 
underside of the main chassis.This is about a 12 or 15 flat ribbon 
connector.fixed mine..73 john
----- Original Message ----- 
From: "Maciej Wieczorek" <sp2xf at wp.pl>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Wednesday, July 08, 2009 2:27 PM
Subject: [ICOM] IC 775 parts needed (display)


> GM from Poland,
>
> Looks like I'm having some trouble with the display on my IC 775 DXII. 
> While
> turning on the dualwatch or split something strange is happening (some of
> the figuers are not well visible, others are displaying too much, eg. 
> figure
> 8 appears instead of 2, etc.) Turning off/on the radio resolves the 
> problem
> for "some time" and than it happens again.
>
> I know there is common problem with icom's colour displays that were
> manufactured for japaneese market versions of some models (in the past I 
> had
> very similar problem with IC 736) so yesterday, with a little help of one 
> of
> the japaneese Ham's I asked Icom Japan,  if they have replacemente parts 
> and
> the answer is -unfortunately not. They don't have.
>
> Maybe someone here could help me? Where else I can ask for the parts, I
> mean, maybe somewhere in USA they're having an old stock?
>
> The part number taken from service manual (for IC 775 DSP) is 5030001150,
> ref.. DS1, part name "LCD HLC8617-012210"
>
> Thanks in advance
> Best 73's
> Mac SP2XF
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html