[ICOM] (no subject)

[Gary P. Fiber]

Jeff,

Did the radio work ok when using the external supply? Can't quite tell 
from your description.
If so its likely an internal power supply issue, could be a simple fix 
doing some re-soldering of the current measuring resister within the 
power supply

Gary K8IZ

kd4lyh wrote:
> Good Day,
>  My Icom 765 has several issues but I would like to work on one at a time
> and post to the list if I correct the problem,
>
>   When xmitting in rtty and I turn up the rf power the display starts to dim
> and the Vcc drops. I have hooked up an external ps and measured to see if I
> was getting the same voltage drop and im not stays at 13.8 so something in
> the radio. Im open to suggestions as what to check or repace. Perhaps
> voltage regulators?
>
>
> Regards Jeff kd4lyh
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com 
> Version: 8.5.406 / Virus Database: 270.13.42/2279 - Release Date: 08/03/09
> 05:57:00
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>