[ICOM] Optional filters in Icom 765

[Gary P. Fiber]

John,

You would need to remove the original filters and replace them with the 
replacements. Meaning more surgery, though it should not be too 
difficult to do.
The CW filters will not enable during SSB mode.

Gary K8IZ

John Geiger wrote:
> I have a question about the Icom 765 and the INRAD 2.1khz filters.  How do these filters fit into the 765, given that it doesn't have an optional filter slot for SSB filters.  The #110 is the 2.1khz filter for the 9mhz IF, and the #314 is the 2.1khz filter for the 455khz IF.  Do they fit into the optional filter slots which Icom intended for the optional 250hz CW filters, or do they replace the stock sideband filters on the circuit boards (requiring much more surgury)?
>
> Any help on this would be appreciated.
>
> 73s JOhn AA5JG
>
>
>       
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>