[ICOM] R-71A battery replacement

[Dan Cotsirilos K9DTC]

Please disregard. I see now that this procedure is for the replacement ram 
board only.


Dan K9DTC



----- Original Message ----- 
From: "Dan Cotsirilos K9DTC" <k9dtc at comcast.net>
To: <icom at mailman.qth.net>
Sent: Wednesday, October 22, 2008 5:58 AM
Subject: [ICOM] R-71A battery replacement


>From what I understood if someone replaced the battery on a R-71A (without 
>maintaining the 3 volts) you had to send it to Icom to program the radio 
>back to life. According to this website is this all you have to do?

http://ronhashiro.htohananet.com/am-radio/ik2rnd-icom-ramboard.html
  1.. Push the LSB button.  Only the LSB operation mode will be active.
  2.. Key in a correct frequency using the numeric keypad. For example 
7.050.0 MHz and save it in VFO-A.
  3.. Push the VFO A=B button. The two VFOs will be now set to the same 
frequency. The equipment is preset and initialized.
  4.. You may now program the 32 memory channels.


Dan K9DTC


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/