[ICOM] ICOM 735 Problem/Service?

[Mike Olbrisch]

It is so long since I had a 735 I have forgotten most of what I knew.

If you do not want to work on it - I recommend Scott Malcolm - MTS at trip.net.

Mike - KD9KC.
El Paso, Tx.
DM61rt

ΜΟΛΩΝ ΛΑΒΕ (Molon labe. [mo-lone lah-veh] Google it)

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================  

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Niel Wiegand
> Sent: Tuesday, January 15, 2008 2:34 PM
> To: icom at mailman.qth.net
> Subject: [ICOM] ICOM 735 Problem/Service?
> 
> Our club ICOM 735 needs repair.
> 
> - CW output is 150 watts measured with the Bird watt meter.
> 
> - The power out control and the internal 50/100 watt switch 
> did not reduce/vary power out.
> 
> - The ALC meter indicates no ALC voltage and does not change 
> with power out control setting (but does bounce up a little 
> when going into transmit)
> 
> Any recommendations for service? This is a fairly basic rig 
> but the controls and functions are straight forward enough 
> that we like to have it as a backup station.
> 
> Niel - W0VLZ
> http://www.w0ibm.org/
> 
> ----
> Your Moderator: Dick Flanagan K7VC: 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/