[ICOM] IC751A-tuning knob repair

[Bert Almemo]

Hi Gary,

Thanks for the info. I've forwarded the info to my friend.

73 Bert, VE3OBU

 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gary P. Fiber
Sent: Thursday, January 03, 2008 5:35 PM
To: ICOM Reflector
Subject: Re: [ICOM] IC751A-tuning knob repair

Yes, remove the painted front panel as there is a sub panel the encoder is
held into with a large nut, like a volume control.
Might be helpful to take a number of digital photos of the front as your
proceed. I thing the encoder just plugs into the circuit board but its been
a long time since I have visited a 751A

Gary K8IZ

Bert Almemo wrote:
> Hi guys,
>
> A friend of mine has a 751A with a tuning knob that doesn't turn. The 
> shaft seems to have seized in the encoder. What is the procedure to 
> remove the encoder from the panel and disassemble the unit for repair?
Thanks.
>
> 73 Bert, VE3OBU
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition. 
> Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 
> 1/2/2008
> 11:29 AM
>  
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/
>
>   

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008
11:29 AM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008
11:29 AM