[ICOM] Older Icom repeater

[Brian K. Gaskamp]

If we loose power at the tower site, we loose tone operation.
If we go and reset the machine itself, then it goes back into tone 
operation.

Seems weird, huh...

What would be the difference in loosing power and reseting the repeater?

Something weird happening, thats all I know...:)

Brian
KA5BKG


----- Original Message ----- 
From: "Ed Yeary" <w4tey at bellsouth.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, December 28, 2008 8:25 PM
Subject: Re: [ICOM] Older Icom repeater


> Do you mean if the power fails the tone board stops operating at all ? If 
> so can you get it started back? If not how do you know the power failure 
> causes it ? Lots of  ?'s
> Ed Yeary W4TEY
> 325 Cumberland Drive
> Harrogate, TN. 37752
>
>
>
>
>
>
> ----- Original Message ----- 
> From: "T. Brad Smith" <ka5cdj at ka5cdj.com>
> To: <icom at mailman.qth.net>
> Sent: Sunday, December 28, 2008 8:42 PM
> Subject: Re: [ICOM] Older Icom repeater
>
>
>> HUH ????
>>
>>
>>
>> On 12/28/2008 18:16:45, ICOM Reflector (icom at mailman.qth.net) wrote:
>>> Any ever have problems with a Icom RP-1520 2m repeater.
>>> As in tone board
>>> won't stay in tone operation.
>>>
>>> If you power it down it goes back into tone operation, but for example 
>>> you
>>
>>> have a power outage, then it won't
>>> go back into tone operation?
>>>
>>> I know it sounds weird, but best I can explain.
>>>
>>> 73,
>>> Brian
>>>
>>> ---- 
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/