[ICOM] proIII swr short
Dan Cotsirilos K9DTC
k9dtc at comcast.net
Fri Dec 5 18:22:28 EST 2008
All the way to the right. My antenna is perfectly resonant. I only used the
tuner to see what would happen since it showed such a high internal reading.
I am using FM and it put out about 1 watt. There is something internally
wrong I was hoping someone would recognize a similar problem.
Dan K9DTC
----- Original Message -----
From: <KI9A at aol.com>
To: <icom at mailman.qth.net>
Sent: Friday, December 05, 2008 5:15 PM
Subject: Re: [ICOM] proIII swr short
> Explain "open, or short" on the meter. Is it all the way to the right?
>
> Also, why use a tuner on a 1:1 antenna? It won't really tune it..
>
> Try a dummy load. Or, if you have a resonate antenna, transmit into that.
> Try keying down using FM, AM, RTTY. If you are still getting 5 watts out,
> ask
> another ham friend to look at it, maybe another set of eyes will see
> something
> yours don't. happens to me all the time.
>
> IF it still 5 watts, I'd be shipping it back to the seller.
>
> 73- Chuck KI9A
>
>
> In a message dated 12/5/2008 5:04:05 P.M. Central Standard Time,
> k9dtc at comcast.net writes:
>
> I just got a PROIII that I was assured was working before it was sent to
> me
> and when I got it it will not transmit. The internal SWR meter shows like
> a
> open or dead short. The receive is perfect.
>
> I got the tuner to match one time (on a 1:1 swr antenna) and it puts out
> 5
> watts. Does anyone have any idea what could of happened?
>
>
> Dan K9DTC
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> **************Make your life easier with all your friends, email, and
> favorite sites in one place. Try it now.
> (http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000010)
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
More information about the Icom
mailing list